New to RVW Pugh are these powerful Vector post drivers. We currently have the Model IV post driver and mini excavator and the Vector post driver to fit mini excavators. Both are excellent machines and have a range of features perfectly suited to the professional fencing contractor.
The Vector Mark IV post driver and mini excavator.
The Vector Mark IV Features:
**380kg solid steel hammer**
** Independent post cap system**
** 600mm side shift travel**
** 300mm rear shift travel**
** High degree of mast lift**
** Heavy duty top link with anti-creep valve**
** Multi-position top link anchor point - 6 positions available**
** Double beam side shift frame**
** Double beam rear shirt slides**
** Self-lubricating wear pads on all slides**
** Independent hydraulic jacks with anti-creep valves**
** Large flotation skid shoes**
** Optional Rockspike, to pound guide holes in extra hard surfaces**
** Optional Mini-excavator attachment**
The video below shows the impressive versatility and power available from these machines, call us today to ask one of our friendly salesmen for a quote.
This machine is a must-have for the serious contractor. The output is phenomenal, it is extremely easy to operate and gives the operator fantastic control.
Posts are driven quickly, cleanly and accurately and the machine can operate in the most awkward terrain and difficult situations with ease.
The 380kg solid steel hammer will drive just about anything, anywhere and at any angle.
In spite of its sophistication and many features it is can be operated by one person with ease.
The Vector Mark II+ post driver.
The Vector Mark II+ Features:
**Hydraulic side tilt**
**Hydraulic top link**
**3 bank high flow valve**
**Independent Post Cap system
**Designed to attach to hydraulic loaders
**Greater left and right tilt because of a hinge point at the bottom of the mast.
**More compact machine without any loss of features or power**
**5 position rope adjustment**
**Wax filled nylon pulley and rope sleeves for extended rope life**
**3 top link positions to choose from**
This post-driver has no limitations when it comes to side tilt. It has almost 30 in both directions. The mast pivots on a 50mm king pin at the base of the machine to allow the operator to pull posts left and right with the side tilt. This would not be possible with other tilt designs.
The ability to attach to hydraulic loaders make it suitable for those fencing on more awkward terrain where the angles at which posts must be driven are often difficult.
The Vector Mini excavator mounted post driver.
Mini-Excavator Post Driver
**180kg hammer for a 2.5 tonne excavator**
**Hammer weight can be increased for higher-tonnage machines**
**Transfers the weight of the mast onto the post while driving, making the hammer more effective**
**Easily operated by one person**
**Short mast makes it very easy to transport both digger and post driver on a trailer**
This post driver is very easy to use in awkward situaltion and is a robust machine which will give years of service.
To find out more or arrange a demo speak to a salesman on 01588 620545 for Churchstoke, Powys. 01477 500033 for Sandbach, Cheshire or 01630 653801 for Market Drayton, Shropshire. Alternatively you can email us at sales@rvwpugh.co.uk
